CAMix
Efficient and flexible aeration for treatment plants
Alternating aeration to save energy
CAMix Cyclic Aerated Mixing Systems provide simultaneous aeration and mixing through a patent-pending, sequentially actuated diffused aeration system. CAMix delivers significant process benefits and substantial energy savings over conventional continuous aeration throughout the entire tank.
Leveraging EnviroMix’s proven intermittent compressed gas mixing technology, CAMix introduces localized proportional air volumes to uniformly mix and aerate areas of a tank in sequence.
To learn more about CAMix, watch this educational webinar.
A revolutionary solution for Economical and precise aeration of the tank
Dynamic air routing
CAMix directs air to one or more zones at a time, both mixing and aerating the individual zones sequentially. Air is provided from a centralized air supply or dedicated blower.
Customizable settings
The aeration valve module (AVM) and controller direct air to discrete zones based on operator selectable parameters. Instrumentation feedback can be used to automatically adjust parameters.
Variable operating modes
Operation can be set to provide continuous complete tank mixing, partial mixing, or extended quiescent conditions in discrete zones or tanks.
Key features of CamiX technology
Energy efficiency
- CAMix delivers energy savings of 50% or greater over conventional continuous aeration systems.
- Unmatched turn-down capability eliminates over-aeration.
- Podstatně nižší potřebná kapacita dmychadel snižuje investiční náklady.
Straightforward Operation
- Intuitive controls adjust the aerated mixing parameters.
- No mechanical or electrical components are in the wastewater.
- Položky pro minimální údržbu jsou umístěny na přístupných místech.
Process optimization
- Uniform mixing is guaranteed with onsite performance testing.
- Aerated mixing parameters can be adjusted manually or through instrumentation feedback.
- Míchání zdola nahoru může podle potřeby zajistit rovnoměrné nebo lokální míchání.
Unparalleled Flexibility
- Variable aerated mixing intensity is based on process parameters.
- System is compatible with any tank geometry, configuration, or depth.
- Sequential aerated mixing eliminates the need for separate aeration and mixing systems.
Where innovative mixing technology is proven
CAMix is designed to be used in industrial and municipal wastewater and water applications, such as:
or any mixing limited application that would typically incorporate a conventional diffused aeration or jet aeration mixing system.
Optimize power consumption
CAMix uniquely provides aerated mixing to meet process oxygen demands through proportional mixing air volumes. The example below uses a system designed for the industry standard 30 cubic feet per minute per thousand cubic feet of tank volume (scfm/kcf).
In a conventional continuous aeration system, the blower must provide enough air to completely mix the entire tank (1,000 scfm). With CAMix, air is directed to individual zones, with the airflow rate designed around an equivalent 30 scfm/kcf per zone (250 scfm), instead of the entire tank. Energy savings of 50% or more are realized through a design using a smaller blower at lower operating horsepower (HP).
(Conventional) - Konvenční, (Blower) - Dmychadlo, (Air mixes entire tank) - Vzduch promíchá celou nádrž, (Energy/Costs) - Energie/náklady, (Continuous) - Kontinuální, (Aeration System) - Provzdušňovací systém.
CAMix Cyklus, (Blower) - Dmychadlo, [Air mixes individual zone(s)] – Vzduch promíchání postupně jednotlivé zóny, (Energy/Costs) - Energie/náklady, (Aerated Mixing) - Provzdušňované míchání, (System) - Systém
Technologies that bring results
Our innovative solutions help WWTPs and drinking water plants reduce costs, increase efficiency and protect the environment. Look at specific projects where our technologies are making a difference.